Sanivite® +

The replacement parts below are only compatible with Sanivite® products made after 01/09/2005.

If your product does not match, please contact our after-sales service

Sanivite+|Sanipumps Range|Repacement Parts|

Filter :

25-40 mm Screw clamp

25-40mm Screw clamp

Reference : NP100550

£2.54 incl. VAT

20-32 mm Screw clamp

20-32mm Screw clamp

Reference : NP100540

£3.07 incl. VAT

Crimp clamp 33.1

Fixing clamp

Reference : OE100129

£5.00 incl. VAT

Single carbon filter replacement

Single carbon filter replacement (pack sold separately ref: FILCHAR). This part is sold by the unit 2 should be ordered in order to receive the complete filter.

Reference : EM120130

£6.31 incl. VAT

Membrane half-clip

N°39 on the parts diagram

Reference : VA100144

£6.46 incl. VAT

32-55 mm Screw clamp

32-55mm Screw clamp

Reference : NP100560

£8.58 incl. VAT

Dual-material air vent valve

Air vent valve.

Reference : BL120348

£8.60 incl. VAT

2 Outlets Adaptor - White

White 2 outlet adaptor

Position N°21e on the parts diagram.

Reference : BL120142

£8.92 incl. VAT

Cable gland

Reference : SI200103

£12.61 incl. VAT

Side inlet non-return valve flap 46 mm

Non-return valve flap 46 mm

Reference : AU010110

£12.91 incl. VAT

Inlet connector 40/46

Rubber white inlet connector 40/46.

Reference : BL120162

£12.91 incl. VAT

Upper discharge pipe white

Upper discharge pipe white, allows waste waters to exit through the case lid once attached to the Non return valve elbow.

Reference : MDBMF

£17.39 incl. VAT

8µf capacitor

8µf capacitor.

Position N°38 on the parts diagram.

Reference : CO100110

£17.78 incl. VAT

XGG microswitch

N°17 on the parts diagram

Reference : SA100155

£17.88 incl. VAT

Case inlet plug

Case inlet plug. Blanks off the side inlets not required.

Reference : BOUCHCOMP

£18.96 incl. VAT

Pages