Sanivite® +

The replacement parts below are only compatible with Sanivite® products made after 01/09/2005.

If your product does not match, please contact our after-sales service

Sanivite+|Sanipumps Range|Repacement Parts|

Filter :

Cable tie

N° 34

To secure the pan gasket to the macerating unit.

Reference : NP100144

£1.79 incl. VAT

Metal adjustable screw clamp - 20-32mm

N° 28C

Metal adjustable screw clamp - 20-32mm

Reference : NP100540

£3.13 incl. VAT

Metal screw clamp 32-55mm

Position N°32 on the parts diagram.

Reference : NP100560

£3.76 incl. VAT

Membrane half-clip

N°39 on the parts diagram

Reference : VA100144

£4.67 incl. VAT

Crimp clamp 33.1

N° 48

Crimp style fixing clamp.

Reference : OE100129

£6.12 incl. VAT

Single carbon filter replacement

Single carbon filter replacement (pack sold separately ref: FILCHAR). This part is sold by the unit 2 should be ordered in order to receive the complete filter.

Reference : EM120130

£7.60 incl. VAT

Case inlet plug

Case inlet plug. Blanks off the side inlets not required.

Reference : BOUCHCOMP

£7.78 incl. VAT

Carbon filter

N° 26b

Carbon filter

Reference : EM120160

£7.81 incl. VAT

Activation Grid/Rod

N° 40

Activation Grid/Rod

Reference : BL120402

£7.88 incl. VAT

Air vent cover

N° 26a

Plastic air vent cover that sits over the air vent opening.

Reference : BL120250

£10.51 incl. VAT

Inlet connector 40/46

N°31

White rubber inlet connector 40/46

Reference : BL120162

£12.31 incl. VAT

Cable gland

N° 18

Cable gland that allows the safe passing of the mains cable through the pump case.

Reference : SI200103

£15.40 incl. VAT

NRV Flap

N° 21C

NRV flap located inside of the NRV discharge pipe.

Reference : SI200118

£15.40 incl. VAT

AU010110 - Side inlet non-return valve flap 46 mm

Non-return valve flap 46 mm Old Sanipro XR

Reference : AU010110

£15.76 incl. VAT

Impeller with nut

N° 10

Impeller with nut

Reference : BL120847

£16.25 incl. VAT

Pages